Bolt In Bracket (B24)


The B24 is the most economical bolt-in bracket offered. It is a heavy-duty Steel bracket that cannot be bent to aid installation. Dimensions are 5mm thick, 69x46mm with a 13mm (1/2") bolt hole. There is a slight 10° bend so that this bracket can be bolted directly to a flat surface and leave room for webbing wrapped into it. It can be sewn in, or wrapped with an LV4 (recommended) or LV10. FIA and SFI 16.1/16.5 approved. Cannot be used for a Lap Belt bolt-in bracket under SFI 16.5. 3" webbing must be folded at the edges for use with this bracket.


Our store is not set up to sell products to your location. Please locate your nearest dealer on our Dealer page.